Connectors

3P Filter Collector Raindivertor (3PFC)

Price from: £ 44.95

The 3P Filter Collector, filters and collects rainwater for water butts and rain tanks. It is made of high quality durable plastic.

The Filter Collector leads clean water to the storage tank with high efficiency under normal rainfall (85 to 95%). The filter can act as the overflow outlet for the tank once filled.

  • With 2 positions open or closed.
  • Integrated filter sieve. The mesh is made of stainless steel (mesh size 0.7 x 1.7 mm).
  • For roof areas up to 70 m².
  • For installation in down-pipes at 68 mm and 110 mm, adapters included.
  • Easy installation and maintenance.
  • Complete with adapter and reduction sets.

Available in 4 Colours: Black, Brown, Grey and White

In stock and available now

  • Colour

  • Price: £ 44.95

Speedy Rain Water Divertor Collector (SPEEDY)

Price: £ 39.99

It's called speedy for a reason: Install in 5 Minutes

Drill - Plug - Done

No removal of the downpipe for the maximum 50m2 installation

Distance between downpipe and wall is irrelevant

Includes filter and overflow function

Suitable for downpipes of 68-100mm

Maximum roof area of 80m2

In stock and available now

  • Price: £ 39.99

Guttermate Downpipe Divertor with Filter (GMATE)

Price from: £ 24.45

Rain Water Filter and Diverter

The only rain water diverter and rain water saver which diverts and filters the water before it goes in the water butt, and allows you to turn the diverter on and off by means of rotating the filter basket with an automatic cut off when the water butt is full.

Cleaning the filter is a 30 second job. No physical effort or tools needed.

Standard water diverters do not filter the water and block very easily. When blocked it is not an easy job to open up the diverter to clean it out.

    Benefits
    The water saver starts the water conservation process for the following activities:
  • Watering Garden
  • Washing Car
  • Garden Pond
  • Rain Water Harvesting
    Standard diverters have the following disadvantages:
  • No capacity to collect debris
  • Allows debris into tub
  • Difficult to clear, Gutter Mate takes 30 seconds
  • Blocks very easily
  • Only one colour!
  • Material not UV stabilised

Part of the Eco Homes specification now states you should have a means of saving rain water. The filter can also be part of a rain water harvesting system.

Debris Filter
Initially this unit was designed to address the problem which most households have at some time or other - blocked rain water gutters.

The main reason for blocked gutters is either installers or householders fit a balloon/bell-type strainer in the top of the drainpipe. This prevents a large proportion of the debris which collects in the gutters from going down the drainpipe. The result is the gutters block and then overflow. This can cause damp walls and rotting roof joists. The weight of rain water in blocked gutters can sometimes collapse the guttering.

The Gutter Mate filter allows you to remove the Balloon strainer in the top of the drainpipe and then the rain water will wash the debris down the drainpipe into the filter. This works very effectively.

The filters have been in operation since the end of 2004 and to date they have worked as they were designed allowing the users to keep their feet on the ground and not on a ladder.

The Health and Safety Executive brought out new regulations in early 2006 with regard to working at heights, the essence of which was that if you can avoid working at heights on a ladder you should do so.

Soakaways and Drains
Are very easily blocked by leaves, moss and sand from the guttering.

The filter prevents debris being washed down the drainpipe into the soakaway or drain. Blockages in either of these can be very expensive to fix relative to the cost of the filter. Expensive to dig out, if they are under your yard or lawn. If blocked could cause localised flooding.

The construction of the filter is in Polypropylene and is UV stabilised. It will have the same life as the drainpipe and will not fade due to sun light. The filter has had UV tests done by one of the largest guttering manufacturers in the country.

This filter can be fitted to drainpipes with a diameter no greater than 80mm, or 75mm square or 3inch by 2inch rectangular. If you have a larger size downpipe, you will need to fit a reducer to get into the top of the filter (Please contact us if interested).

In stock and available now

  • Colour

  • Price: £ 24.45

Guttermate Extension Hose - Clear (CLHOSE)

Price: £ 3.90

Extend the length of hose supplied with the Guttermate Downpipe Connector with our clear plastic hosing, cut to length. Price displayed is for 1 metre. Order a quantity of 2 and we will cut a 2 metre length. Available in lengths up to 25 metres.

Diameter: 25mm

In stock and available now

  • Price: £ 3.90

Standard Downpipe Connector Kit (RSA)

Price: £ 9.95

Connect your Rainsaver Water Butt to your downpipe with this convenient Connector Kit. This high-quality, leak proof kit contains all the fittings and hosing you need to collect the rain water directly from your drainpipe.

Fits standard plastic household downpipes whether round (68mm diameter) or square (65mm)

Pipe is 30cm long

In stock and available now

  • Price: £ 9.95

Water Butt to Water Butt Linking Kit (EXS)

Price: £ 6.49

An ingeneous way to link two Water Butts together for premium efficiency and capacity. This quality leak-proof connector is a must if you plan to situate two waterbutts adjacent to each other.

In stock and available now

  • Price: £ 6.49

Water Butt Divertor or Linking Kit Extension Hose - Black (BCHOSE)

Price: £ 3.90

Extend the length of hose supplied with the standard Downpipe Connector Kit (RSA) or Water Butt to Water Butt Linking Kit (EXS) with our black corrugated plastic hosing, cut to length. Price displayed is for 1 metre. Order a quantity of 2 and we will cut a 2 metre length. Available in lengths up to 25 metres.

Diameter: 25mm

In stock and available now

  • Price: £ 3.90