1,000L Rainwater Harvesting System in for Small (50 m2) to Medium (150 m2) Gardens.

This 1,000 Litre Slim Rainwater Harvesting System has a small footprint allowing you to utilise those small, out of the way spaces which allows you to harvest a substantial amount of rainwater.

This package includes a Submersible Pump as well as a Gutter Mate Filter Diverter which is vital to use with a tank this size. The Gutter Mate is fitted to the downpipe and filters the rainwater before it goes into the tank with the included Fine Mesh Insert.

This 1,000 Litre Rainwater Harvesting System includes all the components required for collection, storage and distribution of rainwater around the garden (Garden Hose not included).

This 1,000 Litre Rectangular Slimline Tank is ideal for collecting rainwater. These black tanks are constructed from polyethylene for above ground locations.

These tanks are ideal for:

• Static rainwater storage
• Water storage for gardens and irrigation systems

Static Water Tank Dimensions:

• Capacity: 1,000 Litres (264 gallons)
• Length: 1350 mm
• Width: 760 mm
• Height: 1300 mm
• Lid: 455 mm
• Weight: 40kgs
• Outlet: 1.5" BSP Male (other sizes and configurations available upon request)

*Please check images for side view and top view of product*

Leave a gap of about 50mm all around the tank to allow for the natural expansion of the tank when full of water. The rainwater filter diverter can be installed in 2 ways, either using the diverter outlet which is the smaller of the 2 outlets on the bottom of the GMFD, if you use the diverter outlet you can use the automatic cut off feature of the Gutter Mate filter Diverter when the tank is full.  If you want to collect all the rainwater coming down the downpipe you should use the main outlet on the bottom of the GMFD. If you use the main outlet you will need to provide a separate overflow out of the tank when the tank is full.  You should always allow a small air space in the top of the tank when full to allow for expansion of the water in summer of around 50mm.

Just follow the instructions which come with the Diverter.

Included with your order:

1 x 1,000 Litre Rectangular Slimline Tank (including brass tap)
1 x Gutter Mate Diverter & Filter in Black & Fine Mesh Insert Bundle
1 x Submersible Pump with Float Switch (350W)
1 x Fittings and Hose to internally connect Pump to Tank Outlet on top of Tank (1” BSP male)

Submersible Pump With Float Switch (350W)

This 40L submersible pump comes with float switch control and discharge extension and is perfect for emptying water butts.

The float switch turns off automatically when the water level has dropped.

This product is supplied with 3 piece aluminium swan neck extension pipes and a snap on connector.

Technical Details:

Voltage: 230V
Maximum output: 40L/min
Maximum head height: 11M
Motor: 350W
Float Switch: Yes
Output aperture diameter: N/A
Max particle diameter: 3mm
Hose adaptor diameter: 19mm

Instruction Guide:
Installation Guide for 40L Submersible Water Butt Pump with Float Switch

Spare Parts Listing Sheet:
Spare Parts Listing Sheet for 40L Submersible Water Butt Pump with Float Switch

Gutter Mate Diverter & Filter in Black & Fine Mesh Insert Bundle

The Award-Winning Gutter Mate Diverter & Filter allows you to recycle rainwater straight from your downpipe. The only rainwater diverter and rainsaver that filters all rainwater before it enters the water butt, tank, drain or soakaway.

The diverter then automatically shuts off the flow to the water butt when full. Collecting rainwater with the GutterMate is both simple and efficient, whether you are saving rainwater to a water butt, tank or a full rainwater harvesting system. Also available in black or brown.

The Gutter Mate is designed to accept 68mm, 76mm and 80mm diameter and 65mm and 75mm square downpipes.