- Full Description
This industrial, self-priming 110v to 230v water pump operates on single phase 240V power supply and can be connected via a standard 3 pin plug with suitable fuse - a good choice when intermittant use means the pump will be stationary for long periods of time. Suitable for commercial rainwater harvesting systems or medium to large domestic gardens.
- The Gm80 is a single stage, self-priming 'jet' pump
- with a 304 stainless steel body and impeller.
- Motor supports are in aluminum, with venturis in thermoplastic.
- It has a stainless steel shaft fitted with a carbon ceramic and NBR mechanical seal and IP44 motor.
- Single phase motors incorporate an overload protection device.
- Designed for pumping clean water only at maximum temperature of 35ºC and should not be allowed to run dry.
- Technical Spec
- Inlet (BSPF) – 1”
- Outlet (BSPF) – 1”
- KW – 0.60
- Volt – 110.230
- Flow (l/min) – 55
- Head (mtrs) – 38
- W x l x h (mm) – 166 x 320 x 180
- Dry weight (kgs) – 6.10
- Packing weight (kgs) – 6.60f
Write Your Own Review