GMVH- 10A Multistage Drainage Pump
The GMVH- 10A is a portable, high head, automatic pump designed for clean water applications
It is a multi-stage pump and is intended for domestic and industrial applications. The
construction incorporates heavy duty bearings, a hard stainless steel (410) shaft fitted with an
ultra-hard wearing silicon carbide mechanical seal (in a chamber of non-toxic oil) for durability.
Corrosion resistant and hard wearing materials are used throughout with the motor housing,
strainer and reinforced outlet in 304 stainless steel. The pump casing, head cover, base plate
and impellers are all in thermoplastic. It has an integral starting capacitor and is available with
or without a float switch. It is not recommended for operation against the closed valve of a tap
or a nozzle. It is supplied with 10 metres of heavy duty rubber power cable.
The maximum depth of submersion is 8 metres.
Pump only as per image
- Pump with discharge elbow, two hose fittings, clamps & 6 meters of 1” (25mm) bore discharge hose.
For more information please click here to see our technical specification sheet for this product.
Manual / Auto: Auto
Outlet (mm): 25.4
Flow (l/min): 110
Head (metres): 32
Vessel / Well / Bore hole size: 435+
Width (mm): 162
Length (mm): 171
Height (mm): 461
Dry weight (kg): 9.30
Packing weight (kg): 11.30
|Maximum Flow (L/min)||110|