Facebook Pixel
Welcome to the new Water Butts Direct website

Industrial 110v - 230v Self-Priming Jet Water Pump

£182.99
Out of stock
SKU
10-0301
Industrial-strength 110v - 230v water pump with a very high hydraulic performance. Suitable for commercial rainwater harvesting systems or medium to large domestic gardens.

This industrial, self-priming 110v to 230v water pump operates on single phase 240V power supply and can be connected via a standard 3 pin plug with suitable fuse - a good choice when intermittant use means the pump will be stationary for long periods of time. Suitable for commercial rainwater harvesting systems or medium to large domestic gardens.

  • The Gm80 is a single stage, self-priming 'jet' pump
  • with a 304 stainless steel body and impeller.
  • Motor supports are in aluminum, with venturis in thermoplastic.
  • It has a stainless steel shaft fitted with a carbon ceramic and NBR mechanical seal and IP44 motor.
  • Single phase motors incorporate an overload protection device.
  • Designed for pumping clean water only at maximum temperature of 35ºC and should not be allowed to run dry.
More Information
Colour Blue
Made From 100% Recycled Materials No
Warranty 1

Product Installation / Information Guide

Write Your Own Review
You're reviewing:Industrial 110v - 230v Self-Priming Jet Water Pump
©Copyright 2020 - Water Butts Direct is a trading name of GM8 Group Ltd. A company registered in England & Wales (company number 4414980) with Magento eCommerce by Screen Pages